; (SCCP*) ; ; An implementation of Skinny Client Control Protocol (SCCP) ; ; Sergio Chersovani (mlists@c-net.it) ; http://chan-sccp.belios.de ; [general] servername = CallWeaver ; show this name on the device registration keepalive = 60 ; phone keep alive message evey 60 secs. Used to check the voicemail debug = 1 ; console debug level. 1 = 10 context = sccp dateFormat = D.M.Y ; M-D-Y in any order. Use M/D/YA (for 12h format) bindaddr = 0.0.0.0 ; replace with the ip address of the callweaver server (RTP important param) port = 2000 ; listen on port 2000 (Skinny, default) disallow=all ; First disallow all codecs allow=alaw ; Allow codecs in order of preference allow=ulaw ; firstdigittimeout = 16 ; dialing timeout for the 1st digit digittimeout = 8 ; more digits ;digittimeoutchar = # ; you can force the channel to dial with this char in the dialing state autoanswer_ring_time = 1 ; ringing time in seconds for the autoanswer, the default is 0 autoanswer_tone = 0x32 ; autoanswer confirmation tone. For a complete list of tones: grep SKINNY_TONE sccp_protocol.h ; not all the tones can be played in a connected state, so you have to try. remotehangup_tone = 0x32 ; passive hangup notification. 0 for none transfer_tone = 0 ; confirmation tone on transfer. Works only between SCCP devices callwaiting_tone = 0x2d ; sets to 0 to disable the callwaiting tone musicclass=default ; Sets the default music on hold class language=en ; Default language setting ;accountcode=skinny ; accountcode to ease billing deny=0.0.0.0/0.0.0.0 ; Deny every address except for the only one allowed. permit=192.168.1.0/255.255.255.0 ; Accept class C 192.168.1.0 ; You may have multiple rules for masking traffic. ; Rules are processed from the first to the last. ; This General rule is valid for all incoming connections. It's the 1st filter. ;localnet = 192.168.1.0/255.255.255.0 ; All RFC 1918 addresses are local networks ;externip = 1.2.3.4 ; IP Address that we're going to notify in RTP media stream ;externhost = mydomain.dyndns.org ; Hostname (if dynamic) that we're going to notify in RTP media stream ; externrefresh = 60 ; expire time in seconds for the hostname (dns resolution) dnd = on ; turn on the dnd softkey for all devices. Valid values are "off", "on" (busy signal), "reject" (busy signal), "silent" (ringer = silent) rtptos = 184 ; sets the default rtp packets TOS echocancel = on ; sets the phone echocancel for all devices silencesuppression = off ; sets the silence suppression for all devices ;callgroup=1,3-4 ; We are in caller groups 1,3,4. Valid for all lines ;pickupgroup=1,3-5 ; We can do call pick-p for call group 1,3,4,5. Valid for all lines ;amaflags = ; Sets the default AMA flag code stored in the CDR record trustphoneip = no ; The phone has a ip address. It could be private, so if the phone is behind NAT ; we don't have to trust the phone ip address, but the ip address of the connection tos = 0x68 ; call control packets tos (0x68 Assured forwarding) ;earlyrtp = none ; valid options: none, offhook, dial, ringout. default is none. ; The audio strem will be open in the progress and connected state. private = on ; permit the private function softkey ;mwilamp = on ; Set the MWI lamp style when MWI active to on, off, wink, flash or blink ;mwioncall = off ; Set the MWI on call. ;blindtransferindication = ring ; moh or ring. the blind transfer should ring the caller or just play music on hold ;protocolversion = 3 ; skinny version protocol. Just for testing. 2 to 6 [devices] type = 7905 ; device type (see below) autologin = line79052,,line79052 ; lines list. You can add an empty line for an empty button (7960, 7970, 7940, 7920) description = Phone7905 ; internal description. Not important ;tzoffset = +2 transfer = on ; enable or disable the transfer capability. It does remove the transfer softkey park = on ; take a look to the compile howto. Park stuff is not compiled by default speeddial = ; you can add an empty speedial if you want an empty button (7960, 7970, 7920) speeddial = 1000,name ; speeddial number and name cfwdall = off ; activate the callforward stuff and softkeys cfwdbusy = off dtmfmode = inband ; inband or outofband. outofband is the native cisco dtmf tone play. ; Some phone model does not play dtmf tones while connected (bug?), so the default is inband imageversion = P00405000700 ; useful to upgrade old firmwares (the ones that do not load *.xml from the tftp server) deny=0.0.0.0/0.0.0.0 ; Same as general permit=192.168.1.5/255.255.255.255 ; This device can register only using this ip address dnd = on ; turn on the dnd softkey for this device. Valid values are "off", "on" (busy signal), "reject" (busy signal), "silent" (ringer = silent) trustphoneip = no ; The phone has a ip address. It could be private, so if the phone is behind NAT ; we don't have to trust the phone ip address, but the ip address of the connection ;earlyrtp = none ; valid options: none, offhook, dial, ringout. default is none. ; The audio strem will be open in the progress and connected state. private = on ; permit the private function softkey for this device ;mwilamp = on ; Set the MWI lamp style when MWI active to on, off, wink, flash or blink ;mwioncall = off ; Set the MWI on call. device = SEP00119341E684 ; device name SEP [lines] id = 1000 ; future use pin = 1234 ; future use label = 79051 ; button line label (7960, 7970, 7940, 7920) description = Line 79051 ; top diplay description context = sccp incominglimit = 2 ; more than 1 incoming call = call waiting. transfer = on ; per line transfer capability. on, off, 1, 0 mailbox = 1001 ; voicemail.conf (syntax: vmbox[@context][:folder]) vmnum = 600 ; speeddial for voicemail administration, just a number to dial cid_name = 7905 CID ; caller id name cid_num = 79051 trnsfvm = 1000 ; extension to redirect the caller (e.g for voicemail) secondary_dialtone_digits = 9 ; digits for the secondary dialtone (max 9 digits) secondary_dialtone_tone = 0x22 ; outside dialtone musicclass=default ; Sets the default music on hold class language=en ; Default language setting ;accountcode=79501 ; accountcode to ease billing rtptos = 184 ; sets the the rtp packets TOS for this line echocancel = on ; sets the phone echocancel for this line silencesuppression = off ; sets the silence suppression for this line ;callgroup=1,3-4 ; We are in caller groups 1,3,4. Valid for this line ;pickupgroup=1,3-5 ; We can do call pick-p for call group 1,3,4,5. Valid for this line ;amaflags = ; Sets the default AMA flag code stored in the CDR record for this line line = 79051 ; phone types ; 12 -- Cisco IP Phone 12SP+ (or other 12 variants) ; 30 -- Cisco IP Phone 30VIP (or other 30 variants) ; 7902 -- Cisco IP Phone 7902G ; 7905 -- Cisco IP Phone 7905G ; 7910 -- Cisco IP Phone 7910 ; 7912 -- Cisco IP Phone 7912G ; 7935 -- Cisco IP Conference Station 7935 ; 7936 -- Cisco IP Conference Station 7936 ; 7920 -- Cisco IP Wireless Phone 7920 ; 7940 -- Cisco IP Phone 7940 ; 7960 -- Cisco IP Phone 7960 ; 7970 -- Cisco IP Phone 7970 ; 7914 -- Cisco IP Phone 7960 with a 7914 addon ; ata -- Cisco ATA-186 or Cisco ATA-188 ; kirk -- Kirk telecom ip phones